LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 702919 Removing And Installing Trim Panel For Seat Well (All Models) >> Installing Trim Panel For Seat Well >> Installing Bushing For Rear Backrest

Installing Bushing For Rear Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Screw in bushing for rear backrest -1-  in -direction of arrow-  .
    Fig 1: Installing Bushing For Rear Backrest
    G09829133Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals