LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (70 - Linings, Insulation -- CARRERA (997)) >> WM 702419 Removing And Installing Front Side Section Trim (All Models) >> Installing Front Side Section Trim >> Installing Front Side Section Trim Panel (Driver's Side)

Installing Front Side Section Trim Panel (Driver's Side)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert side section trim panel -3-  insert -Arrow A-  and screw down with the fastening screws -2-  . → Tightening torque: 2.0 ft. lb. 
    Fig 1: Installing Front Side Section Trim Panel (Driver Side)
    G09829128Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert the fuse carrier cover -1-  with both clips -4-  into the lateral side section trim panel -2-  and clip in -Arrow B-  .
scientia non olet · About LEMON Manuals