LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (03 - Maintenance, Diagnostics -- CARRERA (997)) >> WM 033500 On-Board Diagnosis (OBD) (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt3 RS 911 Gt2) >> Resetting Service Interval

Resetting Service Interval

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

If the engine oil is changed during maintenance work, the service interval must be reset.

  1. Start PIWIS Tester II 9818  and follow the instructions on the Tester.
  2. Select vehicle type, press [F12] and start the automatic control unit search.
  3. Select the menu Instrument cluster  , Maintenance/repairs  and press [F12] to continue.
  4. Select the Reset service interval  menu and press [F12] to continue.
  5. Select the model year  and press [F12] to continue.
  6. Select the unit  and press [F12] to continue.
  7. Select GT vehicle  and press [F12] to continue.
  8. Check that → 5.  , → 6.  and → 7.  are selected and press [F12] to continue.
  9. The service interval is reset. Press [F12] to exit.
  10. Shut down the Tester and disconnect it from the vehicle.
scientia non olet · About LEMON Manuals