Adjusting Front Camber
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Unlike the 911 Carrera (997), a basic camber adjustment is made by means of intermediate plates on the 2-part control arm of the front axle on the 911 GT3/GT2. A 1-mm-thick adjustment plate -arrow- is fitted as standard on the right and left in the 911 GT3/GT2.
Camber adjustment (fine adjustment) is carried out at the spring strut mount in the same way as for the 911 Carrera (997).
The 2-part control arms permit a correspondingly increased camber value for circuit use. This is achieved using thicker adjustment plates.