Adjusting Camber

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Turn the eccentric -B- as required after releasing the lock nut using special tool insert for torque wrench 96260 .

Fig 1: Identifying Toe And Camber Eccentrics

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tighten lock nut for camber eccentric to 100 Nm (74 ftlb.) using special tool insert for torque wrench 96260 together with a torque wrench.

Fig 2: Identifying Special Tool 96260 (Torque Wrench)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.