Adjusting Camber

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Turn the eccentric accordingly -B- after releasing the fastening nut using special tool Insert for torque wrench 96260 .

Fig 1: Identifying Toe And Camber Eccentrics

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Use special tool 9626 in combination with a torque wrench to undo and tighten the fastening nuts of the toe and camber eccentrics. The prescribed lock-nut tightening torque of 100 Nm (74 ftlb.) also corresponds to a setting on the torque wrench of approx. 100 Nm (74 ftlb.).

Tighten fastening nut for camber eccentric to 74 ftlbs using special tool Insert for torque wrench 96260 , in combination with a torque wrench.

Fig 2: Identifying Special Tool 96260 (Insert For Torque Wrench)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.