LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (44 - Wheels, Tires, Suspension Alignment -- CARRERA (997)) >> WM 4440IN Information On Tires/Mounting Tires (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Tires >> Tyre Damage - Caused While Removing/Mounting Tires

Tyre Damage - Caused While Removing/Mounting Tires

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

When mounting tubeless tires, check the sealing surface of the tire and the disc wheel for cleanliness and any signs of damage. Bear in mind here that the bead base performs the sealing function on tubeless tires. When mounting the tire beads, use only the specified tire mounting pastes. The following can occur if an unsuitable mounting paste is used:

scientia non olet · About LEMON Manuals