LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (44 - Wheels, Tires, Suspension Alignment -- CARRERA (997)) >> WM 440594 Balancing/Optimizing Wheels (All Models) >> Balancing/Optimizing Wheels >> Overview

Balancing/Optimizing Wheels: Overview

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The entire process is divided into three operations.

  1. Fitting the tire on the rim.
  2. A - Measure radial force variations and optimize the wheels if necessary. Afterwards, balance the wheels.

    B - As an alternative to item 2 A, if there is no device available to measure radial force variations: Stationary balancing of the wheel (eliminating static and dynamic imbalance) with optimization of rolling smoothness.

  3. Fitting the wheel on the vehicle.
scientia non olet · About LEMON Manuals