Vehicle Height

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The following values relate to the empty weight, i.e. full fuel tank, vehicle with tools, but without driver and without additional weights!

Vehicle height	RoW/USA: Standard C4/C4S Targa	RoW/USA: PASM C4/C4S Targa	RoW: Performance C4/C4S	RoW/USA: PASM 911 Turbo/911 Turbo S
Front axle
Height with 18-inch wheels	→ Control value: 141 mm+/-10 mm	→ Control value: 131 mm+/-10 mm	→ Control value: 121 mm+/-10 mm	→ Control value: 130 mm+/-10 mm
Height with 19-inch wheels	→ Control value: 143 mm+/-10 mm	→ Control value: 133 mm+/-10 mm	→ Control value: 123 mm+/-10 mm	→ Control value: 132 mm+/-10 mm
From road contact surface to lower edge of hexagon-head bolt of cross-member screw connection to the body.
Rear axle
Height with 18-inch wheels	→ Control value: 164 mm+/-10 mm	→ Control value: 154 mm+/-10 mm	→ Control value: 144 mm+/-10 mm	→ Control value: 152 mm+/-10 mm
Height with 19-inch wheels	→ Control value: 165 mm+/-10 mm	→ Control value: 155 mm+/-10 mm	→ Control value: 145 mm+/-10 mm	→ Control value: 153 mm+/-10 mm
From wheel contact surface to the locating bore in the rear-axle side section (between toe and camber eccentrics).