LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (01 - Sales Check -- CARRERA (997)) >> WM 010101 Checking Wheel Mounting (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Checking Wheel Mounting

Checking Wheel Mounting

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Re-tightening wheel bolts and checking that they fit securely relates only to the conventional wheel mounting (several bolts per wheel).

This is not necessary for wheels with central bolts! 

  1. Re-tighten the wheel bolts to the specified tightening torque and check that they fit securely.
    • Use suitable commercially available tools (wrench size 19 mm) together with a tested torque wrench, covering the range of 130 Nm (96 ftlb.). Never use an impact bolter.
    • Do not loosen the wheel bolts to check whether they are secure. Re-tighten the wheel bolts and check that they fit securely. 
    • Tightening torque: 130 Nm (96 ftlb.) 
scientia non olet · About LEMON Manuals