Functional Check
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The following requirements must be met when fitting the seat belt.
- If one of the requirements listed below is not met, the seat belt or seat-belt buckle must be replaced.
It must be possible to unroll the belt strap smoothly from the belt retractor via the deflector fitting by pulling evenly.
The tongue of the seat belt must engage audibly in the buckle.
An abrupt pull on the belt strap must lock the belt retractor.