LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 619619 Removing And Installing Convertible Top Control Unit (CABRIO Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move convertible top to service position.
  2. Removing cover over the motor
    1. 2.1. To loosen the carpet, pull out the plastic clips using special tool 21 and take out the carpet. Disassembly Tool, Universal Nr. 21 
  3. If the control unit must be replaced, then read out the values from the control unit before removal. PIWIS Tester 9718  → 619619 REMOVING AND INSTALLING CONTROL UNIT FOR CONVERTIBLE TOP  - "Programming" section
scientia non olet · About LEMON Manuals