Calibrating The Convertible Top

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The convertible top opens and closes automatically during convertible-top calibration with the PIWIS Tester 9718 . Calibration can be started irrespective of whether the convertible top is open or closed. The latching hook in roof frame 1 does not close during calibration. There must not be any objects in or on the convertible top to obstruct this.

Connect and switch on the PIWIS Tester 9718 .
Switch on ignition.
Select the menu item Convertible Top, Drive Links , and select Calibrate menu item in the command line which then appears.
Start calibration with the [F7] key.