LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 619219 Removing And Installing Hinge For Hood Compartment Lid (Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install hood. → 610119 REMOVING AND INSTALLING HOOD  - section on "Installing"
  2. Fasten drive for hood compartment lid on the right and left. → 617219 REMOVING AND INSTALLING TRANSMISSION FOR HOOD COMPARTMENT LID DRIVE  - section on "Installing"
  3. Install additional flap. → 619119 REMOVING AND INSTALLING ADDITIONAL FLAP  - section on "Installing"
scientia non olet · About LEMON Manuals