LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 619219 Removing And Installing Hinge For Convertible-Top Compartment Lid (Speedster) >> Subsequent Work >> Installing Pneumatic Spring At The Hinge Side

Installing Pneumatic Spring At The Hinge Side

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the rear pneumatic spring.
    Fig 1: Securing Pneumatic Spring
    G09832224Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Get a second person to hold the hinge to prevent it from closing accidentally.
    2. 1.2. Position the pneumatic spring -1-  on the ball joint and press it in -arrow-  . The pneumatic spring clicks into place.
  2. Check that the safety clips have engaged correctly. The safety clip must be directly on the head of the pneumatic spring.
scientia non olet · About LEMON Manuals