Installing Additional Flap

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Additional Flap Installation Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Insert additional flap -2- upward onto hinge pins of the convertible-top compartment lid -3- -arrow A- and pull forward -arrow B- .

Fig 2: Installing Flap
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull locking lever -1- backward -arrow C- (against direction of travel) to lock the additional flap. The additional flap -2- is locked if locking lever -1- projects approx. 5 to 8 mm over the body of the additional flap in the area of dimension -X- .
End convertible top service position.