LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 619019 Removing And Installing Convertible-Top Compartment Lid (Speedster) >> Removing Convertible-Top Compartment Lid >> Releasing Wire Harness For Additional Brake Light

Releasing Wire Harness For Additional Brake Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Convertible-Top Compartment Lid Installation Position
G09832158Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Cut tie-wraps -2-  around wire harness for additional brake light -1-  .
    Fig 2: Disconnecting Brake Light Wire Harness
    G09832159Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release plug connection for additional brake light -3-  and pull it off -arrow A-  .
  3. Unclip wire harness holder -4-  at the convertible-top compartment lid hinge -5-  (-arrows B-  ).
scientia non olet · About LEMON Manuals