LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 619019 Removing And Installing Convertible-Top Compartment Lid (Speedster) >> Installing Convertible-Top Compartment Lid >> Locking Wire Harness For Additional Brake Light

Locking Wire Harness For Additional Brake Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press in wire harness holder -4-  at the hinge -5-  (-arrows A-  ).
    Fig 1: Securing Wire Harness
    G09832162Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Connect plug connection for additional brake light -3-  (-arrow B-  ).
  3. Secure wire harness for additional brake light -1-  with tie-wraps -2-  .
scientia non olet · About LEMON Manuals