LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 618619 Removing And Installing Hydraulic Cylinder (CABRIO Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install hydraulic pump. → 618419 REMOVING AND INSTALLING HYDRAULIC PUMP  - section on "Installing"
  2. Calibrate hood. → 6101K2 K2 -CALIBRATING HOOD 
  3. Install the rear side trim panel. → WM 707519 REMOVING AND INSTALLING REAR SIDE TRIM PANEL - section on "Installing" 
scientia non olet · About LEMON Manuals