Installing Cable For Locking Hook: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locking Hook Cable Installation Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Position cable for locking hook -1- with support on the body and screw down the fastening screws -3- . Tightening torque → Tightening torque: 7.5 ft. lb.

Fig 2: Installing Locking Hook Cable
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage cable for locking hook -1- to the cable holder -2- .
Position trim -2- and secure with the expansion rivets -1- .

Fig 3: Installing Trim
Courtesy of PORSCHE CARS NORTH AMERICA, INC.