Installing Convertible-Top Compartment Lid Drive Gear: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Convertible-Top Compartment Lid Drive Installation Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Position driving mechanism -1- in the center on the hinge and screw down the positioning bolts -2- . Tightening torque → Tightening torque: 7 ft. lb.

Fig 2: Installing Driving Mechanism
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push in plastic washer -4- .

Fig 3: Installing Deflector Rail
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position deflector rail -3- on hinge and secure with fastening screws -2- . Tightening torque → Tightening torque: 7 ft. lb.
Press in fixing clip -1- .
Position lever -2- on locking hook and clip into fastening clip -1- .

Fig 4: Engaging Lever
Courtesy of PORSCHE CARS NORTH AMERICA, INC.