Removing Motor For Convertible-Top Compartment Lid Drive

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Disengage electric plug connection for microswitch -5- from holder, release -A- and disconnect.

Fig 1: Disconnecting Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosen both fastening nuts -1- , release the electric plug connection -2- and unplug from control unit.

Fig 2: Removing Control Unit Fastening Nuts
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull motor with driving mechanism to the rear out of the console.
Loosen the two hexagon-head threaded bolts -3- and remove.

Fig 3: Removing Convertible-Top Compartment Lid Motor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove motor for convertible-top compartment lid drive -4- .