LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 616019 Removing And Installing Switch For Roof (CABRIO Models) >> Removing Switch For Roof

Removing Switch For Roof

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Roof Switch Installation Position
G09832083Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Turn over center console.
  2. Release connector -1-  (-arrows a-  ) and pull it off.
  3. Press locking lugs on switch for roof -2-  outwards -arrows b-  and push switch for roof up out of the center console -3-  .
    Fig 2: Removing Roof Switch
    G09832084Courtesy of PORSCHE CARS NORTH AMERICA, INC.