LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 615519 Removing And Installing Linkage For Rear Cover (Crossbar) (Speedster) >> Removing Linkage For Rear Cover

Removing Linkage For Rear Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Cover Linkage Installation Position
G09832071Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screws at the left and right -1, 2-  on the linkage -3-  and strut -4-  .

    The front fastening screw -1-  must not be loosened if the linkage is to be refitted.

    Fig 2: Removing Linkage
    G09832072Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Get another person to help you remove the linkage -3-  from the vehicle -arrows-  .
scientia non olet · About LEMON Manuals