Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear cover at the center/sides with respect to convertible-top compartment lid | Gap dimension A | 7 mm | 1 mm | ||
| Rear cover at the center/sides with respect to convertible-top compartment lid | Gap dimension B | 2 mm | 1.3 mm | ||
| Fastening screws securing linkage to roll-over bar frame | Tightening torque | 45 Nm (33 ft. lb.) |