Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear cover at the center to rear cover at the sides | Continuous seam joining line | Gap dimension A | 5 mm | 1.5 mm | |
| Rear cover at the center to convertible-top compartment lid | Gap dimension B | 7 mm | 1 mm | ||
| Rear cover at the center to convertible-top compartment lid | Gap dimension C | 2 mm | 1.3 mm | ||
| Rear cover at the sides to convertible-top compartment lid | Gap dimension A | 7 mm | 1 mm | ||
| Rear cover at the sides to convertible-top compartment lid | Gap dimension B | 2 mm | 1.3 mm | ||
| Rear cover at the sides to cover | Gap dimension C | 5 mm | 1 mm | ||
| Fastening screw securing rear cover to linkage | Item 1 | Tightening torque | 1 Nm (0.5 ft. lb.) | ||
| Fastening screw securing rear cover to linkage | Item 2 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Fastening screw securing rear cover to linkage | Items 3-4 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Fastening screw securing rear cover to linkage | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw securing seat belt to body | Tightening torque | 50 Nm (37 ft. lb.) | +/-10 % |