LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 615419 Removing And Installing Rear Cover (Crossbar) (Speedster) >> Preliminary Work >> Notes

Preliminary Work: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Preliminary work when convertible top is closed.
    1. 1.1. Open the convertible top (convertible-top compartment lid remains open).
    2. 1.2. Move front seats forward and fold them over.
  2. Preliminary work when convertible top is open.
    1. 2.1. Release and open the convertible-top compartment lid.
    2. 2.2. Pull the covers -1-  on both sides of the vehicle out of the rear cover -arrow A-  and place them in the storage compartments -2-  (-arrows B-  ) (or set them aside).
      Fig 1: Inserting Convertible-Top Compartment Lid Covers
      G09832047Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals