LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 615419 Removing And Installing Rear Cover (Crossbar) (Speedster) >> Preliminary Work >> Loosening Seat Belt And Fitting

Loosening Seat Belt And Fitting

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lever off cap -1-  with a screwdriver -arrow-  .
    Fig 1: Removing Seat Belt
    G09832048Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screw -2-  . Remove washer -3-  , seat belt mount -4-  and spacer sleeve -5-  .
scientia non olet · About LEMON Manuals