Removing Tension Rope

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The following spare parts and tools are required for repairing the tension rope:

Fig 1: Identifying Tension Rope

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

A Tension rope

B Eye

Disengage tension rope at the shaped sheetmetal part.
1. 1.1. Cut open plastic sleeve -1- with a pair of scissors.
2. 1.2. Disengage tension rope -2- from the tension spring -3- at the shaped sheetmetal part.
3. 1.3. Pull tension rope -2- out of the piping -4- .
  
  Fig 2: Removing Tension Rope
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.