Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut securing hood support to assembly aid | Tightening torque | 23 Nm (17 ft. lb.) | |||
| Fastening screw securing hood support to body | Tightening torque | 50 Nm (37 ft. lb.) | |||
| Fastening screw securing main folding top bow to hood support | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening screw securing thrust wedge to main folding top bow | Tightening torque | 2.8 Nm (2 ft. lb.) | |||
| Fastening screw securing tension strap to roof frame 1 | Tightening torque | 5 Nm (3.5 ft. lb.) | |||
| Fastening screw securing plastic panel to roof frame 1 | Tightening torque | 5 Nm (3.5 ft. lb.) | |||
| Fastening screw securing air deflector to styling frame | Tightening torque | 1.7 Nm (1.5 ft. lb.) | |||
| Fastening screw securing styling frame to roof frame 3 | Tightening torque | 1.7 Nm (1.5 ft. lb.) | |||
| Gap A between styling frame 2 and styling frame 3 | With hood frame closed | Gap dimension | 3.1 mm | +0.5 mm | |
| Fastening screw securing styling frame to roof frame 2 | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw securing aluminum profile to styling frame 3 | Tightening torque | 1.7 Nm (1.5 ft. lb.) | |||
| Fastening screw securing aluminum frame to styling frame 2 | Tightening torque | 1.7 Nm (1.5 ft. lb.) |