LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 611919 Removing And Installing Convertible Top Lock (Speedster) >> Installing Convertible Top Lock

Installing Convertible Top Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position convertible top lock -1-  from below -arrow-  on the roof frame -2-  .
    Fig 1: Installing Convertible Top Lock
    G09831904Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Coat the fastening screws -3-  with screw-locking lacquer and tighten. → Tightening torque: 4.5 Nm (3 ft. lb.) 
  3. Close the convertible top and check the locking function.
scientia non olet · About LEMON Manuals