Removing Cover For Convertible Top Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Convertible Top Lock Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove cover -B- of convertible top lock -A- . Hold the cover at the top of the front latch area with your fingers and release it by pressing it forwards. Pull cover -B- down off the convertible top lock.

Fig 2: Removing Convertible Top Lock Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert Allen key -1- into convertible top lock -A- and turn in -direction of arrow- (inscription "Open") until locking hook is in the extended end position (perceptible stop).

Fig 3: Moving Locking Hook To Extended End Position
Courtesy of PORSCHE CARS NORTH AMERICA, INC.