LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 611919 Removing And Installing Convertible Top Lock (CABRIO Models) >> Installing Convertible Top Lock >> Installing Cover For Convertible Top Lock

Installing Cover For Convertible Top Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide cover -B-  over the convertible top lock from the rear -A-  . Ensure the cover -B-  is centered and engages in the guide, then push it forward until it clicks into position. Press the front edge of the cover -B-  up and bend it forward slightly with your fingers. The cover -B-  clicks into place.
    Fig 1: Installing Convertible Top Lock Cover
    G09831902Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Lock convertible top.
scientia non olet · About LEMON Manuals