Removing Water Channel

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Water Drip Pan Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

CAUTION: Pointed or sharp objects

Risk of cracks, pricks or cuts

→ Wear personal protective gear.

Remove cable holder -1- (-arrow A- ) and loosen sound absorber -2- to the side -arrow B- .

Fig 2: Loosening Sound Absorber
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press out clamp -1- and screw off fastening nut -2- .

Fig 3: Identifying Water Channel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Cut out water channel -1- with a knife -2- .

Fig 4: Removing Water Channel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove residual adhesive -3- and clean sealing surface.