LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 611019 Removing And Installing Front Convertible-Top Mount (CABRIO Models) >> Removing Front Convertible-Top Mount >> Removing Convertible-Top Peg Mount

Removing Convertible-Top Peg Mount

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Convertible-Top Peg Mount Installation Position
G09831860Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip cap -1-  in a downward direction with a small screwdriver and remove it -arrow A-  .
    Fig 2: Removing Convertible-Top Peg Mount
    G09831861Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -2-  and remove convertible-top peg mount -3-  downwards -arrow B-  .
scientia non olet · About LEMON Manuals