LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 610519 Removing And Installing Latch At Front (CABRIO Models) >> Removing Latch At Front >> Removing Front Lock

Removing Front Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Lock Installation Position
G09831801Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Release the two fastening screws -1-  and pull the front lock -2-  down and off -arrow-  from the windscreen frame.
    Fig 2: Removing Front Lock
    G09831802Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Push up the electric connecting lines for the interior light and the control units for garage door opener through the assembly openings on the front lock.
  3. Release connector -1- -Arrow A-  and remove from roof microswitch -2- -Arrow B-  .
    Fig 3: Pulling Microswitch Connector
    G09831803Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals