LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (61 - Convertible Top, Hardtop -- CARRERA (997)) >> WM 610519 Removing And Installing Latch At Front (CABRIO Models) >> Installing Latch At Front >> Installing Front Lock

Installing Front Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push on connector -1-  for roof microswitch -2- -arrow-  until it is heard to engage.
    Fig 1: Pushing Microswitch Connector
    G09831804Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Push the electric connecting lines for the interior light and the garage door opener control unit from above through the assembly openings on the front lock.

    Information 

    When fitting the front lock make sure the electric connecting lines are laid so that they are not trapped.

  3. Mount front lock -1-  from below -arrow-  on windscreen frame.
    Fig 2: Installing Front Lock
    G09831805Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Tighten front lock with the two fastening screws -2-  . → Tightening torque: 7.5 ft. lb. 
scientia non olet · About LEMON Manuals