Fitting Mounting Points For The Hardtop Locking Lever On The Plate

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fit. mounting -A3- for the hardtop locking lever on the plate -D- .

Fig 1: Identifying Hardtop Locking Lever Mounting Points Dimensions

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

-A3- = Base
-A7- = Hexagon-head bolt 6 x 20 with disc
-B- = Support cheek
-D- = Base plate

Work procedure:
1. 1.1. Fit mounting points -A3- both with hexagon-head bolts -A7- according to the dimensions specified on the plate -D- .