Move Convertible Top To Service Position

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Convertible Top Service Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Switch on ignition.
Move convertible top -1- to the rear electrically until the convertible-top compartment lid -2- has reached the rear end position. Move convertible top -1- forward electrically until the convertible-top compartment lid -2- moves forward, then interrupt closing operation.

Fig 2: Moving Convertible Top To Service Position
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
NOTE:
Operation of the hood in service position
- Risk of damage to hood frame and rear window
→ Do not move the hood to the "Close" position by electrical means when in service position.
Disengage left and right tension cables -3- and fold up the tension bow.
Switch off the ignition.