Repairing Convertible-Top Compartment Lid Drive

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Open convertible-top compartment lid.
1. 1.1. Insert Allen key (tool kit) -1- into the drive axle -2- and turn it anti-clockwise until the convertible-top compartment lid -inset- is fully open (perceptible stop).
  
  Fig 1: Opening Convertible-Top Compartment Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Close convertible-top compartment lid.
1. 2.1. Grasp convertible-top compartment lid -1- above the brake light and push forward until it is closed.
  
  Fig 2: Closing Convertible-Top Compartment Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosen hexagon socket head bolt.
1. 3.1. Turn Allen key (tool kit) -1- clockwise until the hexagon socket head bolt -2- (left-hand thread) is unscrewed.
  
  Fig 3: Loosening Hexagon Socket Head Bolt
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Bond in hexagon socket head bolt.
1. 4.1. Coat hexagon socket head bolt -1- with medium-strength screw-locking compound and screw it in by three turns (left-hand thread).
  
  Fig 4: Tightening Hexagon Socket Head Bolt
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.