Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Top of side panel to rule | Adjustment value A | 50 mm | |||
| Rear side panel (rule or aluminum section) to center of assembly aid peg | Adjustment value | 139 mm | |||
| Centre of assembly aid peg to lower edge of convertible-top peg housing on inside | Adjustment value | 1070 mm | |||
| Diagonal dimension of styling edge | Adjustment value D | 1024 mm | +/-2 mm | ||
| Adjust tension cable | Adjustment range | approx. 15 mm |