Checking Diagonal Dimension Of Styling Edge
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
After calibrating the assembly aids and fitting the convertible top with convertible top closed, the check dimension from the styling edge, roof frame 1, lower edge diagonal to styling edge, roof frame 3, upper edge, rear should be → Adjustment value D: 1024 mm +/- 2 mm .