LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (27 - Starter, Power Supply, Cruise Control -- CARRERA (997)) >> WM 271219 Removing And Installing Battery Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Battery Cover

Installing Battery Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engage battery cover with external hooks in left and right mounting points of cowl panel cover.
  2. Insert battery cover as far as it will go by pivoting it inward  and applying simultaneous pressure  in direction of windscreen.
  3. Align turn-lock fasteners fore-and-aft and engage by pressing down lightly.
  4. Locate locking hooks at the connecting flanges with the plenum panel side covers by pressing down lightly.
    Fig 1: Installing Battery Cover
    G09819653Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Check gap dimension of battery cover; if necessary, rework the cowl panel covers or adjust the covers of battery, cowl panel, plenum panel so that they mate. → 271219 REMOVING AND INSTALLING BATTERY COVER 
scientia non olet · About LEMON Manuals