Motor For Sunroof
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The limit positions of the sunroof are deleted from the control unit when the battery is disconnected and connected.
- Switch on ignition.
- Press the rocker switch to open until the sunroof is completely open.
- Press the rocker switch to close until the sunroof is completely closed.
- Touch the one-touch function and check if the sunroof is in the end position for "optimal noise level". If not, then repeat the process.
The end positions of the sunroof are now stored in the control unit again.
Information