LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (0X - Complete Vehicle - General -- CARRERA (997)) >> WM 0X03IN Running Gear Maintenance: Steering Gear - Visual Inspection Of Bellows And Tie Rod Joints(CARR. Coupe, CARR. S Coupe, Sport Classic, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3, Gt2, Gt3 RS) >> Checking >> Checking bellows

Checking bellows

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Tie rod ends: check play and dust bellows 

  1. Raise the vehicle → 400000 LIFTING THE VEHICLE .

    Information 

    • The rubber dust bellows and tie rods can be damaged by external influences, e.g. stone impact, or during assembly work. 
    • If a rubber dust bellow leaks, the joint or the tie rod must be replaced because any dirt or moisture that seeps in will destroy the joint. 
  2. Check play and dust bellows.
  3. Check dust bellows and joints are in working order and free of leaks.