| Fastening screw securing knock sensor to crankcase |
External Torx screw, M8 x 35 |
Tightening torque |
23 Nm (17 ftlb.) |
+/-2 Nm (+/- 1.5 ftlb.) |
|
| Fastening screw securing knock sensor to crankcase |
External Torx screw, M8 x 35 |
Tightening torque |
23 Nm (17 ftlb.) |
+/-2 Nm (+/- 1.5 ftlb.) |
|
| Fastening screw securing high-pressure line holder to cylinder head |
External Torx screw, M6 x 45 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Fastening screw securing high-pressure line holding clamp to holder |
External Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|