Installing Air Guide In Wheel Housing

Insert and align air guide in wheel housing.
Connecting piece must be clipped to the center part of the air guide!
Position connecting piece -1- on the side panel and secure the center part loosely with two M6 screws.
1. 2.1. Tighten tapping screws -2- .
  Tightening torque 3 Nm (2 ftlb.)
  
  Fig 1: Connecting Piece For Air Guide On Side Panel
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in cover.
Secure the air guide with M6 screws.
Tightening torque 10 Nm (7.5 ftlb.)