LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- 911 CARRERA (991) >> WM 135955 Replacing Crankshaft Sealing Ring (Transmission Side) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

NOTE: Removing and installing flywheel
  • Leaks
  • Risk of damage to the flywheel and adjacent components

→ Be very careful during removal and installation.

→ Get another person to help because of the weight.

Information 

Loosen and tighten screws on the component according to specifications.

  1. Remove transmission.

    → 343519 REMOVING AND INSTALLING TRANSMISSION .

    → 373419 REMOVING AND INSTALLING PORSCHE DOPPELKUPPLUNG (PDK) .

    Manual transmission: 

  2. Remove the clutch.

    → 305019 REMOVING AND INSTALLING CLUTCH .

  3. Remove dual-mass flywheel.

    → 136019 REMOVING AND INSTALLING FLYWHEEL .

    Porsche Doppelkupplung (PDK): 

  4. Remove the flywheel.

    → 136019 REMOVING AND INSTALLING FLYWHEEL - PORSCHE DOPPELKUPPLUNG (PDK) .