| Hall sender to cylinder head |
Internal Torx screw, M6 x 16 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Knock sensor to crankcase |
External Torx screw, M8 x 35 |
Tightening torque |
23 Nm (17 ftlb.) |
+/-2 Nm (+/-1.5 ftlb.) |
|
| Ignition coil to cylinder head cover |
Internal Torx screw, M6 x 16 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Ground cable for ignition coils to cylinder head cover |
Cheese head bolt, M6 x 12 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Spark plug |
Initial tightening |
Tightening torque |
32 Nm (24 ftlb.) |
+/-2 Nm (+/-1.5 ftlb.) |
|
| Spark plug |
Second tightening |
Tightening torque |
25 Nm (19 ftlb.) |
+3 Nm (+2 ftlb.) |
|
| Oil-pressure sender to crankcase |
Internal Torx screw, M6 x 20 |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Oil-level sender to oil tank |
Hexagon nut, M6 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Control valve to oil guide module |
External Torx screw, M6 x 16 |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Pulse sender to transmission flange |
Cheese head bolt, M6 x 16 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|