Group 27 - Starter, Power Supply, Cruise Control

Location	Description	Type	Basic value
Retaining bar on cowl panel frame or battery console	Collar nut, M8	Tightening torque	23 Nm (17 ftlb.)
Terminal clamp to battery terminal	M6 nut	Tightening torque	6 Nm (4.5 ftlb.)
Ground lead of battery to cowl panel frame	Collar nut, M8	Tightening torque	15 Nm (11 ftlb.)
Rail on battery console	Hexagon-head bolt, M8	Tightening torque	23 Nm (17 ftlb.)
Battery console to holder	Hexagon-head bolt, M8	Tightening torque	23 Nm (17 ftlb.)
Holder for battery console to body	Hexagon-head bolt, M8	Tightening torque	23 Nm (17 ftlb.)
Generator to bracket	External Torx screw, M8 x 90	Tightening torque	15 Nm (11 ftlb.)
Starter to crankcase	External Torx screw, M10 x 35	Tightening torque	45 Nm (33 ftlb.)
Starter cable to terminal 50	Hexagon nut, M6 or hexagon-head bolt, M6	Tightening torque	7 Nm (5 ftlb.)
B+ line to starter	Collar nut, M8	Tightening torque	18 Nm (13 ftlb.)
B+ line to generator	Collar nut, M8	Tightening torque	18 Nm (13 ftlb.)